ECU1 tagreader

You are here:
< Alle kategorier

The ECU1 tagreader can read emiTags and then clear its content or check the battery status, chip number, etc. It can also be used to give the chip a temporary number (relevant for rental chips). All support articles are in Norwegian.

emiTag koblingsskjemahefte norsk

Program for reading emiTags, and changing codes on ECU & eScan

Read and program emiTags

Nyeste versjon av eUpgrade

USB Driver for Emit Hardware (ver.2.12.28)

(USB driver ver 2.12.28 as of February 2021. Possibly new drivers may be available here: https://ftdichip.com/drivers/vcp-drivers/)

Content